Electric Oil Pump 50 Lt – 12 V – MARINA 25

Why MARINA 25 Electric Oil Pump 12 V ?

WHAT IT IS: It is a self-priming liquid ring pump with a star-shaped impeller. It is equipped with two-way rotation as standard and a high-efficiency motor designed to operate continuously. The unique hydraulic geometry allows the pump to operate even with air bubbles present in the suction liquid.

HOW IT WORKS: To obtain suction capacity, it is necessary to fill the pump body through one of the fittings. The suction capacity is present in both directions of rotation.
This pump requires a 12V electrical connection. Select an electric power cable with 2 prongs and a minimum cross-section of 6 mmq and a maximum length of 3 meters. Remove the cover from the top of the pump, unscrewing the 2 Phillips screws, insert the cable through the black rubber on the side of the pump, connect the cable to the clamp in the base, and re-screw the cover. Make sure to disconnect the electrical cable from the energy source (battery, electrical panel, etc.) before starting the pump. WARNING: Electrical connections and remote control must be performed by competent personnel! Poorly performed work can cause even serious damage to things and people.

TRANSFERABLE LIQUIDS: Neutral, food-grade, clean, non-viscous, chemically non-aggressive or abrasive, with a transfer temperature not exceeding 35°C, is the characteristic of liquids that can be transferred by the pump. The viscosity of the liquid shall not exceed 3 cps for continuous free-delivery service, and shall not exceed 20 cps for intermittent free-delivery service, with the presence of an operator for surveillance. Some examples: water, wine, diesel fuel.

User Manual